Needle Knotter and Leader Knotter Set moca Stick 《Name》Needle Knotter moca Stick 《Size》 　Outer Diameter: φ approx. 4.6mm Total Length: approx. 45mm 《Features》 ★ You can easily tie a hook by hand. It's small, so it won't get in the way whether you hang it on your vest or put it in your pocket. Applicable hooks are Gure hooks and Chinu hooks, and the size is up to Chinu hook size 4. Hooks larger than Chinu hook size 4 cannot be inserted into the hole at the tip, so they cannot be used. Instructions 1. Insert the hook into the hole at the tip and turn it 90 degrees to pull. This fixes the hook. 2. Place the line along the left groove. 3. Wrap the line around the tip 4-5 times. 4. Pass the line from the right groove into the loop. 5. Pull the line. 6. Remove the hook from the stick. 7. Adjust and cut off the excess line, and you're done. 《Name》PE Leader Knotter moca Stick 《Size》 　Outer Diameter: φ approx. 4.6mm Total Length: approx. 45mm 《Features》 ★ You can easily tie a hook by hand. It's small, so it won't get in the way whether you hang it on your vest or put it in your pocket. Instructions 1. Insert the leader into the lower hole of the stick and pull it out from the tip. 2. Make a loop with the leader at the tip. 3. Pass the PE line from under the loop. 4. Wrap the PE line around the stick 8 times. 5. Wrap the PE line down the stick 8 times. 6. Slowly pull the PE line. 7. Hold the leader and PE line and pull tightly, tightly. 8. Cut the line and you're done. ★ Videos on how to tie knots are introduced on the blog. Please search for (PE and Leader Knot moca Stick), (10-second hook tying challenge), and (Needle Knotter moca Stick). 《Please Read》 ・Made with a 3D printer. 　We make them carefully, but please understand that they are handmade before purchasing.