Set of 7, 2x4 Adjusters Scratch-prevention sheets are an extra 100 yen. Please comment if you want them. For other quantities, please comment. These are DIY parts for fixing 2x4 lumber vertically to create a pillar. You don't need complicated procedures or special tools just to set up a pillar. You can easily install them because they can be firmly fixed using the force of a jack. Imitation and plagiarism are prohibited. Adjusters with only the upper part have been available before, but I thought about how to help those who don't have a drill or an 8mm drill, so I created the lower part. I came up with the drill-free type. DIY Storage Parts I added a washer between the upper hexagon and the lumber. This addition provides stability and prevents loosening. Therefore, when assembling the upper part, insert the washer into the bolt before inserting it into the hole. Assembly Since they are shipped disassembled, insert the washer into the bolt as shown in photo 3 and lightly tighten it (don't overtighten), then insert it, and put the washer, nut, nut, and washer in order, and tighten the upper part with a nut. Installation Method ① Cut the 2x4 lumber to be the pillar at a height of approximately 80mm less than the installation location. ② Screw the lower part of the adjuster to the top of the 2x4 cut in ①. (Photo 4) ③ Insert the screw side of the upper adjuster into the hole in the pillar made in ②. ④ Once positioned, stand it vertically (using a level), and you can tighten it by turning the lower nut clockwise with a wrench. 〇 Place the scratch-prevention sheet between the floor/ceiling and the bottom of the pillar and the top of the adjuster. It's easy to attach with double-sided tape. Tools Required 〇 13mm wrench or monkey wrench, etc., a tool that can turn the nut 〇 Electric drill or impact driver or Phillips screwdriver 〇 Saw (can be cut at a home center) 〇 Level (there are also apps.) Drill not required Due to being handmade, there may be some variations. Painting is also possible, so please contact me. Any number of sets is possible. Please contact me. #Adjuster #CatTower #CatWalk #WallMountedTV #TensionWallStorage #Partition #FallPrevention #WashingMachineShelf