//Vintage replica large-size thumbwheel nuts for Gibson ABR-1 // ・These are large-size thumbwheel nuts, made to the same size (diameter) as vintage ones. ・Made in Japan for peace of mind, unlike overseas products or genuine Gibson parts, the stud holes are precisely drilled, resulting in less play. ・Even without play in the studs, you often see the thumbwheels wobbly, causing the ABR to be tilted. ・When the ABR is wobbly or tilted, it can cause intonation problems and dampen the body's vibrations, which is not good. ・I've purchased several other companies' products from overseas, but many of them had a lot of play even when they weren't aged, causing the ABR to tilt, or even though they looked good, the sound quality suffered. ・The diameter is approximately 16mm, about 1mm larger in diameter than Historic Collection and True Historic models. ・The thickness is about 2.5mm, the same thickness as current Historic Collection and True Historic models. ※Old Historic Collection models have a thickness of 2.7mm, so they will be slightly thinner for older Historic Collection models. ・The material is brass alloy, and the surface is aged nickel-plated. ・Exclusively for Gibson inch posts, it can be used on ABR Les Pauls, SGs, Flying Vs, Firebirds, etc. ・Price is for a set of 2. ※Images 6, 7, and 8 are reference images for comparison. The thumbwheel nuts in the comparison images are not included.