Handmade by Eric Custom, this is a high-output P-90-sized pickup with a genuine construction using two Alnico 5 bar magnets. This is the bridge position pickup. The output measured between 12.5k and 13.25k ohms. (Nominal value is reportedly 13.4k ohms) The pole piece spacing is 50mm. The lead wires are approximately 320mm long, so it can likely be used in the neck position as well. The lead wire type is vintage-style braided wire. If you find the bridge pickup on your Gibson or similar guitar to be a bit underpowered, give this one a try. Mounting screws and springs are included.