Pioneer PL-25 Record Player Rim Drive Vintage - Working 50hz A vintage Pioneer record player with an S-shaped tonearm, rim drive, and auto-return function. This model is for 50Hz. Although it's old, the wood veneer of this era is very beautiful. This is a highly recommended unit for those who have collected many records from the 60s, 70s, and 80s with their monthly allowance. It's a model that embodies the simple pleasure of a record player: placing a new record, excitedly moving the tonearm to the edge of the record, slowly pulling the lever, and waiting for the long-awaited music to begin. Necessary adjustments have been made, so the idler wheel rotates quietly, and it is a beautiful working item without any problems. The stylus pressure is direct reading. The drive unit uses an idler wheel to rotate the rim (rim drive). Maintenance necessary for function restoration has been performed, including cleaning the spindle, cleaning the electrical contact points, and applying grease, oil, and electrical contact restorers. The speed selector lever switches between Off, 35 RPM, and 45 RPM. The arm lifter is oil-damped and lowers slowly. The headshell is an old-fashioned design, black-painted shell, and the cartridge is a MM type cartridge, PC-11, with a stylus PN-11. This PL-25 is set for 50Hz power supply areas (mainly the eastern Japan region, east of the Shizuoka/Itoigawa line). Accessories: Dust cover, cartridge (PC-11), stylus/needle (PN-11), EP record adapter Main Specifications: Auto Mechanism: Motor power auto switch Idler auto controller Auto return, auto cut Motor: 4-pole synchronous type Turntable: 30cm diameter aluminum die-cast (weight 1kg) Cartridge: MM type (PC-10) Needle: 0.6mil diamond needle Output Voltage: 5mV (1kHz, 50mm/s) Output Balance: Less than 2dB (1kHz, 50mm/s) Proper Stylus Pressure: 2.5g～3.5g Tonearm: Light metal static balance pipe arm Power Supply: AC100V, 50Hz/60Hz switchable External Dimensions: Width 440 x Height 165 x Depth 350mm