The following is from the official website. This product is no longer sold and is difficult to obtain. A body suit has been created for the Sony α7 III, α7R III, and α9. The α7 III, α7R III, and α9 can accommodate larger batteries compared to their predecessors, so the camera's battery compartment door has also become slightly larger. Accordingly, the flip cover of the body suit has also become larger, but to prevent the grip of the case itself from becoming thicker, a cutout has been made at the bottom of the grip to avoid interference with the battery compartment door. The material used is "Pueblo" from the Italian company "Badalassi Carlo." Because it has been damaged, scratches are not noticeable. Also, because it is vegetable-tanned leather, the texture changes the more you use it. The bottom is equipped with a "flip cover" to access the battery compartment. You can replace the battery while the suit is on. You can also insert and remove the dual-slot SD cards while the body suit is attached. Of the three various ports on the right side of the camera body (opposite the grip), the front two can be used while the body suit is attached. *The LAN terminal and sync terminal of the α9, the microphone terminal and sync terminal of the α7R III, and the microphone terminal of the α7 III cannot be used while the body suit is attached. The body suit is fixed to the camera body with a specially designed screw. The screw has a tripod screw hole, so it can be attached to a tripod. The overall height is extended by approximately 10mm, allowing the little finger to grip the camera, improving the hold feeling. The back of the case is a fully open type. It does not obstruct the tilt-up of the LCD screen or the operation of the buttons. There is a slight gap on the grip side of the body suit (indicated by the arrow). This is a specification to allow for space at the opening so that it does not get caught on the bottom of the body suit when opening the battery compartment door, which has become larger than the previous model, and is not a product defect. Please understand. Materials: Cowhide, PE, Metal Production: Made in Japan / Handmade Weight: Approximately 65g