This is an embroidered iron-on patch of a crown. m(_ _)m It's a beautiful patch with a lovely blue gradient. Crown size: approximately 4cm *Iron-on adhesion is not possible on waterproof or water-repellent materials. 1. Temporary Adhesion Place a thin cloth such as a handkerchief or gauze over the material where you want to attach the patch to protect it. Then, iron over the patch. The trick is to apply weight with medium heat for about 10 to 20 seconds. Be careful not to damage the material with heat and adjust the pressing time accordingly. *Please be especially careful with thin polyester and nylon materials. They are sensitive to heat and may melt. The patch may peel off while it is still hot after ironing, so wait for it to cool down and check that the patch is securely attached. If it peels off, the adhesion is not yet complete, so increase the ironing temperature and time. 2. Permanent Adhesion Iron from the back of the material where you want to attach the patch. Don't forget to use a cloth and press firmly with weight. If the material is thinner than the patch, this step will allow heat to reach the film more directly, making iron-on adhesion more effective. *Iron-on adhesion is not a 100% permanent attachment method, so we recommend combining it with sewing. Although carefully made, there may be slight distortions or errors due to it being handmade. We appreciate your understanding and purchase of handmade items. m(_ _)m Motif: Cross Parts: Patches, decorative materials