This is an outlet pickup purchased for maintenance. I'm selling it because I have extras. ※The images are samples. The color of the cable, the appearance of the pole pieces, etc., may differ. If the cable insulation is damaged, it may be protected with heat shrink tubing, so please be aware of this. Although it is unused, it is an outlet item, and may have scratches, dents, rust, chips, peeling, paint lifting, uneven finishing, etc., caused during transportation, storage, or manufacturing. Please do not purchase if you are looking for a pristine item. I find it useful because it's cheap and works reasonably well. The resistance value varies depending on the lot, so please inquire if you have specific requirements. There will always be errors. Screws and springs are included. It's versatile with a front low power, rear high power, short leg, and four-conductor cable. ※Please install the pickup and other parts at your own risk as it is a modification. We do not provide after-sales support for wiring. Wiring diagrams and boxes are not included. Regarding the four-conductor cable, the cold wire is connected to the ground, and the tap wires are connected to each other, with the single wire being the hot wire. Sometimes they are connected in parallel, so we check the phase and match it, but if it's different or if you're combining it with other pickups, please adjust the phase before using. Due to imported goods, the purchase price and individual specifications vary depending on the time of purchase, so the images are samples and the exact same item will not be delivered, and the price will also fluctuate. If you are concerned about details such as "it used to be ~" please do not purchase. We do not accept returns for minor issues unless the item is unusable. The color of the cable, cord, etc., changes from time to time. Please ask questions beforehand and make sure you understand the details, such as whether the pole pieces protrude from the back, the length, etc. Some adjustable pole pieces are not threaded, so height adjustment can only be done by pushing from the front and back. The specifications of the mounting screw heads (pan head or oval head), length, spring shape, etc., also change constantly, so the same items cannot be provided. The mounting ears for the screws may bend during shipping, but they can be bent back, so please correct them yourself before use. Metal will break if bent repeatedly. For covered pickups, the solder that holds the cover and base plate together may come off during shipping, so please attach it yourself.