※ If you wish to purchase with CELL and RSX buck converters, add 1000 yen (add 600 yen if you want either one). I strongly recommend this as it can be placed during disassembly and repair. Please refer to the listing page for details on the PS3 buck converters. ※ If you purchase 3 sets (1 set of 2 pieces) or more, you will receive the above buck converters (RSX, CELL) as a free gift. This is a replacement board compatible with YLOD repair, developed by a famous overseas YouTuber, called PS3 Tantalizer. This is the latest version "PS3 Tantalizer 0.9b". Official website https://oshpark.com/profiles/RIP-Felix ・Designed to replace the NEC/TOKIN Proadlizer used in some PlayStation3 models, it does not require cutting or installing the board at an angle (difficult), and you only need to place the repair parts as shown in the photo and lightly solder the contact parts. ・The board is equipped with 6 0805 size MLCC ceramic capacitors and 3 7343 size conductive polymer aluminum electrolytic capacitors in parallel. ・7343 capacitors must be 2.5V・470UF or more. The configuration of 0805 MLCC is as follows: 47UF / 22UF / 10UF / 4.7UF / 2.2UF / 1UF → With the above combination, it demonstrates performance equal to or better than the original NEC/TOKIN Proadlizer. ・You can freely cut the outer, grooved part of the board. We also have a pre-cut version available separately, so please consider that as well. ※ This part does not necessarily fix YLOD. There are various causes for YLOD, and it is said that approximately 80% is caused by the deterioration of NEC Tokin. We recommend that you search on Google before purchasing. Please also take a look at the product site. ※ Due to manual implementation, the finish is not as clean as machine implementation, and some parts are slightly slanted, but there is no problem with the operation. After completion, operation has been confirmed with a tester.