This is a Warmoth Telecaster-type neck. Please note that the headstock orientation is for a left-handed guitar. The condition is as shown in the photos, with some dents and scratches, but there are no issues with playability. I managed it for about 3 years after importing it from overseas about 10 years ago, and then I assembled and used it after acclimating it to the Japanese climate. It is currently stored in a room with a humidity of around 45%. The truss rod has room to spare, and the neck is almost straight. However, as this is a used item and made of wood, please assess the condition based on the photos and purchase/assemble at your own risk. Please refrain from purchasing if you are a highly sensitive person (someone who makes unreasonable claims or complaints). Please also consider that the color may differ depending on the device you are using, as these are the images taken. Neck Specifications: ・Lacquer satin finish maple neck ・Rosewood fingerboard 　※Fingerboard roll-off processing ・Nut width: approx. 41mm ・Medium scale ・22 frets ・10-16R compound radius ・Stainless steel frets (SS6115) 　※Fret edge treatment For reference, GOTOH SG381 tuners were installed. The concept of this neck was to achieve a vintage look with a medium scale and modern playability. It has unique and practical specifications that are not often found elsewhere, and the lacquer finish makes it a neck that you can enjoy using over time. In my subjective review, chords are easier to fret in the low positions, and lead playing is easier to finger with less effort. Stretch-style phrases that were a bit difficult with a long scale are now easier to play thanks to the medium scale. It is recommended as a neck replacement for a Telecaster, but it is also recommended for installation on a Stratocaster or with a reverse headstock. I personally envy guitars with a reverse headstock Telecaster neck installed on a Stratocaster body. Warmoth necks are increasing in price year by year. Even if you buy a new one, the neck may move if you don't acclimate it to the Japanese climate. Necks assembled immediately after being imported are said to be prone to backbowing. Although this is a used item, I am confident that the fingerboard roll-off and fret edge treatment are very well done. Also, there is the advantage that you can assemble it immediately after purchase, so please consider it.