This is a new KTC resin-handled stubby screwdriver that has been modified to resemble a Snap-on grip key holder. (Green color, photos 1 and 2). If purchasing multiple items, please use the bulk purchase function. You will receive a ¥100 discount per item. Since there are many inquiries about the key processing shape, I will include details of the key processing (though it's just a memo). The quick-release female side on the grip side is press-fit flush for a clean look when inserted into the key cylinder. (The image is incorrect.) The groove processing is done by machine using a milling machine. (Reference for processing in the 3rd photo). The groove width, groove length, and groove depth are almost the same dimensions as Snap-on's. The machining is clamped with a three-jaw chuck, so the perpendicularity is accurate. The quick-release hole is processed using a dedicated jig because the center does not come out with a three-jaw chuck or vise. The quick release is press-fit. The key tightening set screw is M5 x 10. Total length (without release) is approximately 58mm, outer diameter is approximately 32mm, and weight is 46g (with release). Although it is new, there may be chucking claw marks or small scratches when removing the bit. The positional relationship between the key groove, the outer shape, and the KTC mark may differ from the photo because the position of the bit stopper is different for each item. Other colors and dimensions are also available. Basically, we do not accept price negotiations.