AREA51 Clone Wah With Output Buffer 中古 Product Description: Type: Wah pedal (for guitar) Adapter: 9V center negative Battery operation: 9V battery Controls: Pedal An early Italian-made wah that makes the voice wail. The Area51 Clone Wah With Output Buffer is a wah pedal for players seeking that sound. Using a specially made hand-wound inductor, it replicates the original 1967 layout (only adding a DC jack) and is hand-assembled on an original circuit board. It uses carefully selected transistors and an ICar taper wah pot. Switching is true bypass. In addition, there is an input level/impedance control trim pot on the internal circuit board, which is set to 68K, the same as a vintage wah, in the initial setting. It can be adjusted to match the volume, such as when there is a difference in volume between ON/OFF. The Clone Wah With Output Buffer also has an output buffer that is effective when connecting a fuzz pedal in the later stage. The buffer can be bypassed, and it does not affect the wah's tone, and a unique power supply circuit is used to prevent voltage drop due to the buffer circuit. The Clone Wah, made with a commitment to handcrafting from the circuit board, has an aggressive wah sound that is crisp and outputs high frequencies firmly, just like a new vintage wah, while at the same time, the sound does not become too light. The Clone Wah With Output Buffer is powered by a 9V battery or a standard center-negative DC9V adapter. There is some wear and tear, but no noticeable scratches. Thank you for your consideration.