A silver figurine with a deep-sea fish (fictional) motif. It's rough from the mouth to just before the tail. It has no teeth, and its mouth is always open. Are the round beads internal organs, eggs, or something it swallowed...? While prioritizing a free-spirited concept, it's properly crafted as a metal sculpture. The stone setting is soldered. The stones are bezel-set using a chisel, not adhesive. This rough texture is likely rarely, if ever, done by others using the same method. WAX prototype created around 2018 / Handmade from green block wax. ・Material: Silver 925, oxidized finish ・Stones: Iolite RD Cabochon 3mm (Asao Kogei) / 10mm resin round bead ・Dimensions: Overall length 66mm x width 28.5mm x height 20.3mm ・Weight: Approximately 19.9g (excluding resin bead) ※ Weight at casting: 24.6g (the whole was framed to prevent casting defects during casting) ・Hallmark: SV925, original hallmark (image processing applied) The polished mirror-finish areas are about 80% complete. There are some fire marks. Due to the lighting, the mirror finish appears gold-ish, but it's the normal silver color without plating. There are some sharp edges, so please be careful not to get injured. No pets. Non-smoking. ● Prices may change due to the soaring precious metal market. (More than double the increase since listing) 〈Cost if cast (cast) at Seaforce as of 12/24/2025〉 ・Labor cost 132 yen/g x 24.6g = 3247 yen ・Metal cost 486 yen/g x 24.6g = 11955 yen Total 15202 yen + round-trip shipping approx. 2000 yen = 【17200 yen or more】 + The actual cost of stones, stone settings, wax, and the processes (labor costs) of prototype creation, soldering, polishing, stone setting, etc. will be added. It's no longer a precious metal that can be made casually...