Order for leedle-sama Front [High] R/L concave = 0.6m Rear [Mid] R/L concave = 0.6m SW Mono concave = 0.6m 2-way split R Monitor Output concave = 0.3m MIC Input 2.5mm mini-jack = 0.3m Thank you for your consideration. Thank you for viewing. This product is a custom-length cable. Subwoofer output 2-way split is also available. Please refer to the separate listing for products that directly insert into the amplifier. [Transaction Flow] Please specify your desired length in 0.1m increments from the following: Front [High] R/L concave = 0.3m~ Rear [Mid] R/L concave = 0.3m~ SW Mono concave = 0.3m~ R Monitor Output concave = 0.3m~ MIC Input 2.5mm mini-jack = 0.3m~ If the estimate meets your requirements, I will add the client's name and specifications and change the price, so please purchase. We set the shipping time to 4-7 days considering the production period, but we will ship as soon as it is ready. Note: Production will begin after purchase, even for all 0.3m lengths. [Please Note] Connectors for multi-drive assist units are not supported. If you are using them, please transplant the original connector. [Features] MOGAMI 2549, highly regarded as a recording studio microphone cable, is used for audio output, MOGAMI 2964, a 75Ω coaxial cable with flexible stranded wire for video, and MOGAMI 3080 for microphone input. [Soldering] WBT-0800 silver solder and a temperature-controlled soldering iron are used, and the work is done by inserting the cable into RCA plugs with heat dissipation measures. [Shielding Treatment] Only the RCA jack side is grounded to the cold, and the shield and conductor are not twisted together, but are processed separately, reducing the solder between the conductor and the jack. [Post-Production Confirmation] We confirm that there are no wiring errors with a continuity check using a tester, and that there are no short circuits, and then the product is completed. Thank you for your consideration.