MS Flex Step-Up, Bumper Cut Processing Jig. The step-up is 2.0mm in the front and 3.0mm in the rear. Engravings have been added for identification. Please check the top image for the engravings. ※ The processing method is the same as the 1.5mm jig, so some of the photos are of the 1.5mm one. Personally, I think there are the following issues: ・Accuracy of processing is not achieved (compared to milling) 　This is the result of processing using this jig, but I believe that sufficient accuracy is achieved. 　However, due to the structure, it is not possible to achieve the same accuracy as milling, so please understand that point. ・Strength is reduced 　Especially on the front side, there is a possibility of breakage due to impact even with a 1.5mm step-up. 　(I have broken it many times) 　Cutting diagonally significantly reduces strength. 　(Milling allows for horizontal cutting, which is less advantageous in terms of strength in comparison) 　As a countermeasure, reinforcement such as applying a carbon plate on the inside is necessary. 　※ If reinforcing before processing, please ensure that the carbon plate and adhesive do not get on the processing area. 　　Processing may become difficult. Considering the issues, I believe this jig is useful for the following people: ・Those who want to step-up easily and inexpensively ・Those whose speed range is not yet very high ・Those who understand strength and reinforcement Contents It will be a set of the following 3 items. ・Jig for bumper cutting and notching ・Front side step-up jig ・Rear side step-up jig How to use ・Please refer to the photos Notes ・Use "Tamiya Thin Blade Craft Saw 74024" for the craft saw. ・To minimize the reduction in strength, it is manufactured with the tightest dimensions. 　Please make adjustments and finishing with a cutter, file, etc. ※ As a standard, please be aware of the following points. This product is produced with a 3D printer. Please purchase only if you understand the unique layering marks, production by individual handwork, discoloration during layering, etc. We cannot guarantee any damages caused by using this product. Please purchase the products from the following: #nonbiry_lab Search tags #Mini4WD #MS #ms #MSFlex #msflex #Jig #ProcessingJig