Recently, I've started selling on another site, so although extremely rare, there's a possibility of simultaneous purchases. In such cases, priority will be given to the first buyer, and the second purchase will be canceled. Thank you for your understanding. Please note that price reductions are not accepted. A while ago, I won a bid on Yahoo Auctions for a thin piece of stabilizing material. It wasn't thick enough to be used as a blank as is, so I cut it in half, corrected the warping, and then pressed it to create a blank. There are compression marks in the center due to the pressing process, but there are no issues with the strength. See images 4 and 5. The material in the last image is the material I won the bid for, and it has already been processed into a pen blank, but I haven't drilled the hole yet, so I'm considering selling it after the hole is drilled. The hardware in the images is for photography purposes only, so it may not be fully inserted or may have scratches, but new hardware will be sent at the time of shipping. Please use it as an assembly image. The size is approximately 140mm in total length, approximately 9mm at the pen tip, approximately 13mm at the maximum diameter, and tapers to approximately 9mm on the clip side. The weight is approximately 23g, and it is a single-action pen without a guide pipe. Also, you can choose the lead size and the color of the hardware. The hardware is available in gold or chrome, and the lead is available in 0.5mm/0.7mm. If you don't choose, I will send a 0.5mm gold one. Made on August 11, 2024