Land Cruiser Prado 150 rear ladder for sale. Questions and direct transactions are welcome. Installation will be done at the time of the transaction. Item is from Saitama Prefecture. (Includes car body scratch prevention film → cut for top and bottom and included) This is a ladder for the (terzo E50) Elgrand, which was modified by a sheet metal worker for installation on a Prado 150. The upper bracket was made to fit the Prado 150. The bracket uses SUS plate, and the welding also uses SUS wire. (Stainless steel plate thickness is 3mm) SUS stands for stainless steel, so it is resistant to rust. Instead of rubber, high-temperature resistant silicone mat is attached to the back of the bracket. The bracket claws hook onto the door, not the wing. The ladder and brackets have been sanded → degreased with thinner → chip-resistant paint → finished with matte black. For reference, a 65kg person was able to climb up and down. Installation method Apply the scratch prevention film to the car. Hook the bracket over the wing. Adjust the position and hook the lower hook under the door and tighten the bolts. No modification is required on the vehicle body. Please bid only if you are satisfied after looking at the images. This is a modified product and not a genuine product, so please refrain from bidding if you are sensitive. No claims, no cancellations, no returns. *Shipping* Yamato Transport Takkyubin 200 size, freight collect, I think.