Club Assembly, Reshafting, and Sleeve Installation Adhesive Cemedine Metal Lock (Made in Japan, Genuine Product) Y610 64g, Divided into 32 portions [Product Contents] 1. Two-Part Acrylic Adhesive Y610 NET. 64g (Cemedine Metal Lock) - Part A: 32g bottle - Part B: 32g bottle 2. Mixing sticks: 3 * When adhering the club head or sleeve to the shaft, 1g of Part A and 1g of Part B (mixing ratio 1:1) is the guideline for the appropriate amount. * When Part A and Part B are mixed, hardening begins after 5 minutes at 20°C. (Part A and Part B do not harden on their own, allowing for long-term storage) * The hardening time varies depending on the temperature, but the bonding work time should be within 3 minutes. * After bonding, it hardens to the point where it doesn't move in a few tens of minutes, but the hardening to reach practical strength is about 60 minutes at 20°C. Please do not move it until then. (The hardening time is longer at low temperatures) * To fill the gap between the hosel of the head and the shaft, stabilize the adhesive strength, prevent looseness, and make it easier to center the shaft, it is recommended to mix about 0.1g to 0.5g of glass beads into the adhesive. * These glass beads have a well-formed particle shape and high strength, and can be used with both steel and carbon shafts, including the adhesive. [Optional Addition] Glass Beads (Made in Japan, particle size approx. 0.150mm) 5g: 100 yen, 10g: 200 yen, 15g: 300 yen, 20g: 400 yen, 30g: 600 yen * If you wish to add options, please contact us via the comment section before purchasing, and we will change the listing content. * For adding 20g or more of glass beads, an additional 20 yen for Click Post will be added. * Regular mail has no tracking or compensation, and there is no delivery on weekends and holidays. For those who wish to remain anonymous or are in a hurry, please request the following shipping methods: - Nekopos (anonymous, with tracking, with compensation) add 40 yen - Click Post (not anonymous, with tracking, no compensation) add 20 yen Please contact us via the comment section before purchasing, and we will change the listing content. * The club assembly method is based on YouTube videos such as "How to Make a Golf Club," "Today's Reshaft," and "Jumbo's Craft Videos." * Many people have purchased this product, and I have used it without any problems, but please use it at your own risk. * Please read the profile section.