This is what I used for practice when I passed the exam on my first try this year. (The crimping tool was also used in the actual exam) "HOZAN Wire Stripper (P-958)" "Phillips screwdriver" "Multiple gang mounting frame" 2-3 pieces If you prepare these separately, you can start practicing. There are other things missing, but I practiced wiring by assuming a switch for the outlet. First, start practicing to complete the wiring for task 7 in 40 minutes, and I think it's a good idea to add what you feel is necessary at a home center or Amazon. (VVF and IV are convenient to buy by the cut at home centers) (VVR and eco-cable are difficult to obtain, so practice stripping only, and substitute VVF for wiring practice) ＜Included Items＞ IWISS Ring Sleeve Crimping Tool - Small and Medium IWS-7s HOZAN Pass Multi-Tool DK-20 HOZAN Pass Clip 10 pieces with holder P-926 Lamp receptacle Surface-mounted outlet Hanging ceiling (square type) 2 pieces Flush-mounted outlet 4 pieces Switch 2 pieces (can be used as single-pole) Outlet BOX (7 holes pre-drilled) Rubber bushing 19 (3 out of 4 are pre-cut) Rubber bushing 25 (3 out of 4 are pre-cut) E19 connector (not threaded) E19 connector bushing 5-pole block terminal (actually need 6-pole) Ring sleeve small 88 pieces Ring sleeve medium 9 pieces Push-in connector 2, 3, 4 poles a few IV 1.6mm Green approx. 50cm VVF 2mm x 2-core approx. 1.8m VVF 2mm x 3-core approx. 2m VVF 1.6mm x 2-core approx. 3.5m VVF 1.6mm x 3-core approx. 5m VVR 2mm x 2-core approx. 1m VVR 1.6mm x 2-core approx. 1m EM-EEF (eco-cable) 2mm x 2-core approx. 1m Used reference book "Suii-to Goukaku" Spare wires for ring making practice a few Sample of multiple gang mounting frame (no photo) ＜Not Included＞ Other tools such as strippers, drivers, pliers Multiple gang mounting frame Double outlet Various grounded outlets 250V outlet Flush-mounted pilot lamp 3-way, 4-way switch Position indicator light built-in (hotaru) switch Hanging ceiling (round type) Circuit breaker PF tube PF tube connector E19 tube