<<Compatible Models:>> Various MSX models Fujitsu FM-7 series (FM sound source card and FM-77L2, FM77AV series) Sharp X68000 X1/turbo (MD controller not operational due to lack of 5V power) NEC PC-8801mkIISR and successor models, PC-6001/6601 <<Compatible Controllers:>> Mega Drive, Master System, Mark III, SG-1000/II, SC-3000/H This is a conversion cable that allows you to use controllers/pads such as the SEGA Mega Drive on MSX and other systems. (Only the conversion cable will be shipped.) Created by cutting a new extension cable, rewiring it, and attaching a male connector. The Mega Drive pad's bottom row of pins B*GA is converted to MSX's AB無G, and the Mega Drive pad's BC buttons function as BA buttons. (Pin arrangement is based on facing the main unit) For 6-button pads, it is recommended to start in 3-button mode by pressing the MODE button when powering on. There are times when issues occur even on the Mega Drive, and the MODE button (for starting with 3 buttons) is for that reason. The 6-button pad sometimes sends different signals than the 3-button pad, which may be the cause of the problem. The Mega Drive pad in the photo has been connected to a Toshiba HX-10D MSX1 and tested to work with Xevious. The rapid-fire function also worked correctly. Quantity: 2 Shipping: Yu-Packet Post mini Shipping notification: The shipping notification on the system will serve as the shipping confirmation. Immediate shipping upon payment No need for greetings or payment confirmation. Returns are possible, but the buyer is responsible for return shipping costs.