//Vintage replica large-size thumbwheel nuts for Gibson ABR-1 // ・These are large-size thumbwheel nuts, made to the same size (diameter) as vintage ones. ・Made in Japan for peace of mind, unlike overseas products or genuine Gibson parts, the stud holes are precisely drilled, resulting in less play. ・Even without play in the studs, you often see the thumbwheels wobbly, causing the ABR to be tilted. ・When the ABR is wobbly or tilted, it can cause intonation problems and dampen the body's vibrations, which is not ideal. ・I've purchased several overseas products, but many, even non-aged ones, had a lot of play, causing the ABR to tilt, and while they looked good, the sound quality suffered. ・The diameter is approximately 16mm, about 1mm larger in diameter than Historic Collection and True Historic models. ・The thickness is approximately 2.5mm, the same thickness as current Historic Collection and True Historic models. ※Old Historic Collection models have a thickness of 2.7mm, so these will be slightly thinner for those models. ・The material is brass alloy, with an aged nickel-plated finish. ・Exclusively for Gibson inch posts, and can be used on ABR-equipped Les Pauls, SGs, Flying Vs, Firebirds, etc. ・Price is for a set of 2. ※Images 6, 7, and 8 are reference images for comparison. The comparison thumbwheel nuts shown are not included.