New, Unused Mighty Mite MM2914 Never used after purchase! This is a new and unused item! This is a Fender licensed product, and it's a neck that can be directly attached to "Fender" and "Squire (by Fender)" guitars, unless it's a very special model. The neck end has a Mighty Mite brand stamp, and the wood quality is A4 to A4+ level. It has some bird's eye and faint flame patterns visible. *Some adjustment may be required depending on the precision of the original body's woodworking. ■WOODS & MATERIALS Fretboard Material: Birdseye Maple Neck Material: Birdseye Maple Skunk Stripe: Merbau Finish: Satin, Thin Polyurethane Oil Based ■SIZE & SHAPE Neck Profile Shape: C Shape Orientation: Right-hand Scale Length: 25 1/2" Radius: 9.5 Straight Nut Width: 42mm or 1-5/8" installed nut Nut Material: PPS-Flat Bottom Heel Size: 2 11/64" wide ■FRETS & MORE Number of Frets: 22 Fret Size: Medium - 2.4mm - Nickel Inlays: Black Dots Side Dots: Black Truss Rod: Single-adjust at headstock - 4mm wrench not included Tuner Hole Size: 10mm 6-in-line Modern Tuners *Please allow for slight errors due to actual measurements. *Specifications are subject to change without notice. *There may be unevenness in the paint, minor scratches from manufacturing, or rough processing marks that are difficult to see in the images. *Even if you have a genuine Fender body, please be sure to check the size of the neck end, etc., to confirm if it can be directly attached to your guitar.