I LOVE Border Collie waterproof sticker. Color: White (Ideal for black-based rear trunks, bumpers, and also for smoked glass) ★Note★: Because it has a reflective finish on a white base, it may appear silver. Size: 16cm x 7.5cm If you are looking for a different shape of the same breed, click here → #kiriBorderCollie Instant purchase without comments is OK. You don't have to greet after purchase if you find it troublesome. Note: When applying to a car body, wash the car and remove the wax. You will have difficulty with step ④ of the application if wax remains. Also, the sticker you just applied may peel off during subsequent car washes, so it is recommended to wash the car before applying. How to apply the sticker ① Peel off the release sheet attached to the adhesive side of the sticker. Peel carefully so that the sticker does not come off with this release sheet. After peeling, the sticker will be attached to the transparent sheet on the surface. ② Once you have decided where to apply the sticker, hold the transparent sheet of the sticker with both hands and apply it. ③ Apply the sticker by pressing it with a soft cloth such as a towel over the transparent sheet. ④ Finally, peel off the transparent sheet on the surface, but be careful as the sticker may come off with it. If the sticker part comes off together, apply it carefully so that it remains on the place you want to apply it. ⑤ After applying, firmly rub the applied sticker to finish. ⑥ You can apply wax after applying. Other techniques If air bubbles have formed, apply a thin cloth to a hard plate such as a credit card and push out the air bubbles. Also, if you can't remove the air bubbles, make a small hole with a needle or cutter to let the air bubbles out. Dog on board car sticker seal.