This is a slide damper processed with high-performance CNC, based on the HG Carbon Rear Stay 3mm. It uses genuine Tamiya carbon and has been meticulously crafted. < Features of SD-Fix > ■ Slide Stay ・ Retains the original shape of the carbon rear stay, allowing for custom shaping. ・ Equipped with 1-3 springs. 34 different stiffness settings are possible by combining 4 types of springs. ・ Slides in a circular motion. Not only the guide holes but also the spring mounting sections are arranged in a circular pattern. This is a technique only achievable with CNC. ・ 10mm slide range. Please use spacers, etc., when adjusting. ・ Uses brass pipes. Please prepare separately. ■ Top Plate ・ Uses a carbon multi-wide stay. ・ The spring opening is designed to match the slide stay. It is also angled to fit the spring shape, allowing for gap-free assembly. ・ The chassis side has been cut straight and wide. Adjust as desired to fit your machine. Can be cut up to 1.5mm in design. ■ Left and Right Roller Stays ・ Designed for 13mm rollers, with a width of 103.5-104mm. The screw holes for fixing the slide stay are made smaller to reduce wobbling. ・ Roller position can be changed at two points, front and rear. ■ Thrust Angle Adjustment Chip A TR-Fix2 4-degree chip is included as a sample. Other angles are available for separate purchase. ■ Base Plate The silver carbon in the photo is not included. Please prepare your own plate as it uses standard hole positions. Please check the photos for other specifications and conditions. (Surface matte finish) ■ Only the carbon parts in the second photo will be sent. (Photos are examples) Although machined with CNC, there may be slight individual differences. Please refrain from bidding if you are extremely sensitive to appearance, etc. Returns and support are not available. Please consider only if you can make fine adjustments. Please bid with the understanding of the above. ■ Also listed elsewhere. Please understand if it sells out due to timing.