【Product Name】 KYOSHO Mini-Z Kyosho Mini-Z MR-04 T-bar setting guide Set of 2. *Multi-type, compatible with L, LL, and 3L. *There are metal ones available commercially, but they are quite expensive, so we have produced these as inexpensive original plastic products. Although they are not as durable as metal ones, we believe they are sufficient for normal settings. 【Features】 ・This is an auxiliary jig for accurately installing the T-bar and motor mount. ・Using the chassis body as a support guide, the T-bar and motor mount can be accurately installed. ・Compatible chassis types are MM2 / MM / MML / LM, and compatible with wheelbase L (94mm) / LL (98mm) / 3L (102mm). ・Made of plastic, so there is no risk of short circuits, and it can be used even with the battery installed. Note: To improve dimensional accuracy, this product is a 3D-printed product using "PLA resin," which has little flexibility. Please avoid using or storing it in high-temperature locations or places exposed to direct sunlight. 【Specifications】 - Model: MZSG-04 - Compatible chassis: MR-04 - Motor mount: MM2 / MM / MML / LM - Wheelbase: L (94mm), LL (98mm), L3L (102mm) 【Contents】 - T-bar setting guide • MR-04 setting guide x 2 *All items are shown in the second image. 【Set Sales】 Please request a combination of MR-03 and MR-04. x1 = 700 yen x2 = 1,200 yen x3 = 1,650 yen x4 = 2,000 yen x5 = 2,250 yen x6 = 2,400 yen 【Caution】 *Due to being a 3D-printed product, there may be layer lines, slight scratches, or burrs. Also, please avoid using it in direct sunlight or high-temperature locations due to the PLA material. 【Other】 If you have any requests for color, size, etc., please request them in the comment section. We will accommodate them as much as possible.