This is a 60W model with two 6L6 tubes. The exterior has some scratches and wear, but is in relatively clean condition. The standby light bulb on the panel was burnt out, so please replace it. The operation was checked thoroughly before listing, and no problems were found. Laney is a British manufacturer, and the sound also has a British feel. It has a crisp, edgy tone in the high-mids. Thanks to the 6L6 tubes, the low-mids also come out strongly, making it ideal for heavy music. It has 3 channels, reverb, an attenuator, pull-EQ, booster, and many other functions, so it should be easy to use on stage. Compared to the 120W model, it has a gutsy sound. It seems good for rock music. It produces a great range of frequencies, making it enjoyable to play. The running cost is low because it has fewer power tubes, and the body is also about 4 kg lighter, which is an advantage. The power tubes are RUBY (original), and I remember that I replaced some of the preamp tubes with ones I had on hand after purchase and tested and adjusted them. It should have a more three-dimensional and balanced sound than the original. The listing includes only the main unit. Please note that cables and documents are not included. Amp control is also possible with latch signals. (The current model has omitted the latch signal jack, so this unit is more convenient for centralized control) This is a used tube amplifier, so I would like to sell it to someone who can maintain and manage it themselves. There are no operational problems at present, but please understand that we cannot provide a warranty for operation after arrival or refunds, as would be offered by a shop.