ON BOARD Siberian Husky car decal sticker Waterproof sticker. Color: White (Ideal for black-based rear trunks and bumpers, also suitable for smoked glass) ★Note★: Because it has a reflective finish on a white base, it may appear silver. Size: 12cm x 14cm If you are looking for a different shape of the same breed, click here → #kiriHusky Instant purchase without comments is OK. Those who find greetings after purchase troublesome do not need to do so. Note: When applying to a car body, wash the car and remove the wax. You will have difficulty with step ④ of the application if wax remains. Also, the sticker you just applied may peel off during subsequent car washes, so it is recommended to wash the car before applying. How to apply the sticker ① Peel off the release sheet attached to the adhesive side of the sticker. Peel carefully so that the sticker does not come off with this release sheet. After peeling, the sticker will be attached to the transparent sheet on the surface. ② Once you have decided where to apply the sticker, hold the transparent sheet of the sticker with both hands and apply it. ③ Apply the sticker by pressing it with a soft cloth, such as a towel, over the transparent sheet. ④ Finally, peel off the transparent sheet on the surface, but be careful as the sticker may come off with it. If the sticker comes off with it, apply it carefully so that it remains on the desired location. ⑤ After applying, firmly rub the applied sticker to finish. ⑥ You can apply wax after application. Other techniques If air bubbles form, apply a thin cloth to a hard plate, such as a credit card, and push out the air bubbles. Also, if you cannot remove the air bubbles, make a small hole with a needle or cutter to release the air bubbles. Dog on board car sticker seal.