Thank you for viewing. This is a used Endou Double Crossover Point (Scissors) ②. I obtained it new at the time and used it in my own layout, but I am selling it due to a reduction in track layout size. There are no operational or electrical issues. The original box and instruction manual are not included. Only what is shown in the images is included. Points to note when considering purchase: ・Since I used it by placing it without gluing it to the track surface, there are no adhesive marks on the back of the point or the rail connection surfaces, and it is relatively clean. ・Of the four diagonal parts on the outer sides of both ends of the roadbed, three are missing. These are for avoiding the roadbeds of consecutive turnouts, and as such, I removed them for use, but I can't find the original parts. This is a "as is" sale. ・I will include the switch control cords, but you may need some kind of separately sold cord for connection from the power supply side. In my case, I was using KATO point switches... ・I wanted to control the switches in four places all at once, so I will include the Electric Point Cord Interlock (H1555) to combine the two-way split into one. ・There is discoloration and fading of the plastic roadbed due to aging and sun exposure. I don't think there is much deterioration of the resin. If you connect it to new system rails, the colors will be different. Please do not say things like "the color is different" later. ・There are no "cracks" in the roadbed or connection parts, and no "distortion" in the rails. ・Double crossovers are delicate. Please be thorough with back gauge adjustments of the wheels and leveling adjustments of the installation location ^^; ・When listing, I thoroughly cleaned the rail surfaces with Uni Cleaner and anhydrous alcohol ^^ The original box and instruction manual are not included. Only what is shown in the images is included.