Thank you for viewing. ◉ Every DA17V Luggage Board ⚫︎ H400mm x W1350mm Please note that this is made to order and will take approximately 7 days to ship. We make it by layering two cedar cafe boards with wood glue and corrugated nails. We select beautiful boards with few knots, and the board is fixed to the existing M6 pitch of the rear cage. The wooden stays also have holes drilled to the pitch size, so you just need to tighten them with packing and washers, and then place the cafe board on top. To place the board, hold the cafe board with both hands, tilt one side, and lift it higher than the stay. It takes some practice, but please be careful not to damage the vehicle body, and do so at your own risk. Rubber is attached to the stay positions to reduce rattling. Also, if you put wedges in the gaps on the left and right, there will be no problem while driving. If you are concerned, you can install it with fixing packing and screws in the front to prevent it from shifting. The paint is finished with two coats of oil-based Watco Oil (Natural W01). This is a DIY-style amateur work, so there may be scratches or glue marks from the manufacturing process. Please refrain from purchasing if you are looking for a perfect product. ※ Please purchase with the 3N rule (no returns, no claims, no cancellations). ※ Please also refrain from price negotiations. ※ Customers in Hokkaido, Okinawa, and remote islands may incur additional shipping charges, so please comment first. The listed images are all that are available, but please contact us if you have any questions or comments. - Type: In-vehicle shelf - Material: Wood - Mounting method: Screw fixation - Size: Approximately 1350cm x 40cm