Thank you for viewing! This is a Stratocaster of unknown manufacturer. Recommended for those who can do some maintenance themselves. The neck has no truss rod function. It has been slightly improved with DIY neck ironing, but there are two pressure marks on the back of the neck from clamping. Also, the nut was quite low, so it has been replaced with a nut that has been grooved. Overall, the neck condition is not good. If purchased by January 3rd, it will be shipped the same day. The pickup controls are complex, but there are quite a few variations, so there are many sound-making options. It would cost a decent amount just to achieve these controls, so it can also be used for parts. Elixir strings were replaced, frets polished, and the fingerboard oiled around October 2025. Body (basswood type?) Thickness: 44-45mm Neck Maple / Rosewood fingerboard Nut: 42mm Scale: 648mm long scale Appearance: Relic specification Paint: Lacquer-based Controls 1Vol, 1Tone 5-way selector Mini switch (see photos for control details) Pickups F.PU: ・90s Vintage Single (5.6kΩ) ※Simulated humbucker mode (approx. 11kΩ) C.PU ・90s Vintage Single (5.4kΩ) R. Sub PU: ・90s Vintage Single (7.7kΩ) R.PU ・90s Vintage Single (5.5kΩ) ※Simulated humbucker mode (approx. 13kΩ) ●Wiring: ・50s N.O.S Vintage Western Electric ・22AWG silk-wrapped, wax-coated 3-layer cross wire, single core wire (Hot) Accessories Tremolo arm (If there's a spare soft case, I plan to include it, but it's undecided at this stage) ▼Related keywords Stratocaster / Relic / Lacquer / Natural / 21F