This is an outlet pickup purchased for maintenance. I'm selling it because I have extras. ※The images are samples. The color and appearance of the cable may vary. If the cable insulation is damaged, it may be protected with heat shrink tubing, so please be aware of this. Although it is unused, it is an outlet item, and may have scratches, dents, rust, chips, peeling, paint lifting, uneven finishing, etc. due to transportation, storage, or manufacturing. Please do not purchase if you are looking for a pristine item. I find it useful because it's cheap and works reasonably well. The resistance value varies depending on the lot, so please inquire if you have specific requirements. There will always be some error. Screws and springs are included. Front low power, rear high power, 4-conductor cable and short legs for versatility. ※Please install the pickup and other parts at your own risk as it is considered a modification. We do not provide after-sales support for wiring. Wiring diagrams and boxes are not included. Regarding the four-conductor cable, the cold wire is connected to the ground, and the tap wires are connected to each other, with the single wire being the hot wire. Sometimes they are connected in parallel, so we check the phase and match it, but if it's different or if you're combining it with other pickups, please adjust the phase before using. As this is an imported product, the purchase price and individual specifications will vary depending on the time of purchase, so the images are samples and the exact same item will not be delivered, and the price will also fluctuate. Please do not purchase if you are concerned about minor details such as "it used to be like this," and we will not accept returns for minor issues unless the item is unusable. The color of the cable, cord, etc. will change from time to time. Please ask questions beforehand and make sure you understand the details, such as whether the pole pieces protrude from the back, the length, etc. Some adjustable pole pieces may not have screw threads, so height adjustment can only be done by pushing from the front and back. The specifications of the mounting screw heads (pan head or oval head), length, spring shape, etc. are also constantly changing, so the same items cannot be provided. The ears for attaching the screws may bend during shipping, so they can be bent back and should be corrected by the user. Metal will break if bent repeatedly. The covers may come loose during shipping due to the solder that holds the cover and base plate together, so please attach them.