MDF Scrap Wood Colored MDF, Black, 15 x 9.5 cm, 5mm thick, 5 sheets. The MDF is colored by mixing dye during molding, so the cross-section is also colored. You can enjoy beautiful colors without painting. It will be shipped in a Yu-Packet box, "wrapped in an OPP bag for waterproofing." Up to 10 sheets can be shipped together, so from the 6th sheet onwards, it will be an additional 100 yen per sheet. 6 sheets: 980 yen 7 sheets: 1080 yen 8 sheets: 1180 yen 9 sheets: 1280 yen 10 sheets: 1380 yen For more than this number of sheets, they cannot be shipped together, so please purchase the items listed separately. (15% OFF for simultaneous purchase. Please comment.) [Features (excerpt from the manufacturer's website)] Colored MDF (Medium Density Fiberboard) F☆☆☆☆ (Low formaldehyde) Features: Similar to regular MDF, it is made by steaming and defiberizing wood chips, adding synthetic resin as an adhesive, and then hot-pressing it into a board. However, the process of mixing dye (color) is added to the chips. Therefore, the color is the same no matter where you cut it. The surface is smooth and the inside is dense, so the processed surfaces such as cutting and router processing are beautifully finished. However, it is necessary to finish the processed surface with sandpaper. When clear coating is applied, the color will become slightly darker and you can enjoy a different color. Please refer to the following for examples of painting and processing.