This is a set including: Hitec HS-5735MG high-torque servo (metal gear), 15 plastic servo horns for Futaba S3003, and 1 metal servo horn.
**[Product Condition]**
Unused.
Only tested for operation, and the operation is problem-free.
This is a very high-torque power servo.
The motor part has an anodized heat sink.
**[Product Name]**
Hitec HS-5735MG High-Torque Servo (Metal Gear)
**[Manufacturer]**
Hitec
**[Features]**
・Metal gear adopted
・Dual bearing specification
・High torque for large models and robot applications
・This model is currently discontinued
**[Main Specifications]**
・Torque
4.8V: 15.99 kg・cm
6.0V: 19.01 kg・cm
・Speed
4.8V: 0.16 seconds / 60°
6.0V: 0.13 seconds / 60°
・Weight: Approximately 144.6 g
・Size: 58.4 × 27.9 × 50.8 mm
・Motor: 3-pole
・Gear: Metal gear
・Bearing: Dual bearing
・Pulse cycle: 20 ms
・Pulse width: 900～2100 µs
-------------------------------------------------------------------------------------
Futaba standard servo motor S3003 x 2 and 15 servo horns
Please purchase only if you agree that returns are not possible.
Type
Standard hobby servo (for RC) / Analog control method
Operating voltage
Approximately 4.8～6.0V (typical range for RC servos)
Torque
At 4.8V: Approximately 44 oz·in / 3.2 kg·cm
At 6.0V: Approximately 57 oz·in / 4.1 kg·cm
Speed
At 4.8V: Approximately 0.23 seconds/60°
At 6.0V: Approximately 0.19 seconds/60°
Weight Approximately 37g
Dimensions 40 × 20 × 36 mm (length × width × height)
Gear/Bearing
Standard plastic gear/bushing (bearing) type
Applications
Classic servo used in radio-controlled airplanes, RC cars, robots, etc.
Controllable with Arduino
Type...Radio Control