This is a Hamaya (sacred arrow) stand that allows you to mount a Hamaya on the wall at any angle. By gently bending the main body and passing the arrow through the two holes, the Hamaya is secured by the body's restoring force. It has a luxurious metallic gold finish. ＜Patent and Design Registration Pending＞ How to fix the main body to the wall: ① Push pins (2 included) When attaching to a plasterboard wall, use the two push pins to insert them into the small holes in the main body and fix them to the wall (see attached image). ② Double-sided tape (1 sheet included: temporary adhesive double-sided gel tape: manufactured by Yamada Kagaku) Suitable wall surfaces: Glass, tile, marble, acrylic, ABS resin, metal, wood Attach the double-sided tape, which leaves little residue, to the wide surface of the main body and stick it to the wall. * Depending on the compatibility with the wall, the adhesive strength may be weak, so please be careful to avoid damage if it falls. ③ Wood screws (course thread) / nails When attaching to wooden parts such as pillars, insert wood screws etc. into the slightly larger holes in the main body and fix them to the wooden parts. 【Contents】 　Main body: 1 piece, material: PP 　Push pins: 2 　Double-sided adhesive gel tape 【Size】 　Maximum: 210mm x 100mm 　Hole diameter: 34mm 　Please refer to the image. 【Notes】 Regarding the metallic gold coating of this product: This product uses a coating that is resistant to bending, so the paint is less likely to peel off. However, please be careful as the paint may peel off if you bend it excessively when inserting the Hamaya. While it is resistant to paint peeling due to bending, the metallic gold coating is prone to scratches and fingerprints, and there may be some unevenness in the paint or small spots. Thank you for your understanding. The back side is white, but some metallic gold spray may be attached.