The cartridge reader I am selling was created/designed by Sanni and built by me. The product includes everything shown in the first product photo. A 64GB SD card is included. Please review the specifications of this product below: ● Cartridge Reader HW5 Cartreader V5 ● Firmware Ver 14.3 ● Compatible with Sega Mark III and MSX thanks to a custom-designed board. Also, the menu screen display has been changed to reflect Japanese cassette formats. ● Automatic voltage selection function (Vselect) Because the voltage specifications differ depending on the cassette, it is usually necessary to manually change it each time using a voltage selection switch. However, this product automates this process, allowing for safe and easy use. ● SA1 chip support Supports Super Famicom cartridges that use the SA1 chip. ● Expansion of the 64 controller port Allows you to check the functionality of the controller buttons and stick. ● Case [Black] The simple frame distributed on the official website exposes the board, so I created a case that covers the entire unit. ● USB Type-C compatible Please use a standard AC adapter to supply power. ● Operation test An operation test was conducted as shown in the photo. ※ Not compatible with the overseas versions of NES and MASTER SYSTEM. Please refer to the link below for more details about this product: https://github.com/sanni/cartreader/wiki