Thank you for viewing. Regarding the 【5x Speed Reduction Modification】, due to the recent difficulty in obtaining materials, it can only be made when materials are available. Therefore, if you need one, please order as soon as possible. The product includes the sewing machine body in the first photo, the foot controller, the sewing machine belt, etc. Instruction manual, sewing thread, and thread stand are not included. A few meters of thread will be threaded, so please take a photo with a digital camera, etc., beforehand. Also, this sewing machine has many usage instructions available on websites and videos, so please research and use it. This is a modified Seiko TE-6 arm sewing machine. It has been modified to approximately 5x speed reduction and torque-up to sew thick leather. Also, because of the torque-up by belt transmission, the noise is not loud. You can use it with just thread in addition to the set in the first photo, so it takes up very little space. It is recommended for those who cannot secure a large workspace on a tabletop or those who find it difficult to install a dedicated stand. 【Appearance】There are many paint chips and scratches on the arm part, the lower part of the body, and the flywheel. The upper part of the body is relatively clean. The stitch width adjustment screw is a substitute, but the function is the same (photo 8). The motor is a used item with an adjusted connector position, and you can change between high and low. 【Operation】No operational problems. Confirmed that it can sew up to size 5 thread. However, SEIKO te-6 recommends up to #18 needles, so size 8 thread is the ideal range. 【Accessories】Sewing machine table, DBf2 #18 sewing machine needles, bobbins, foot controller. 【Needle】Industrial DB needles 【Specifications】Vertical half-rotation hook 【Stitch Type】Straight stitch only. No reverse stitching (reverse stitching is done by reversing the sewing direction) 【Modifications】5x speed reduction pulley (photo 10), simple bobbin winder (photo 9), presser foot lifter lever added (photo 8), motor mount installed. 【Notes】Because of the high power, the force will not be transmitted unless the sewing machine belt is properly tensioned. Also, apply anti-slip belt wax, etc., to the belt. Since this is an old item, we basically do not provide support, so we would like those who can do some maintenance or those who are willing to try maintenance to purchase it. Also, please refrain from purchasing if you are nervous or tend to return items. Shipping included. #Leathercraft #te-5 #te-6 #SewingMachine #AntiqueSewingMachine #ArmSewingMachine #HandCrankSewingMachine #seiko