【Free Shipping】This is a branching cable for adding pads to Roland V-Drums sound modules in the TD series. It's not a commercially available Y-cable, but a custom-made one with resistors inserted between the cables. For example, by branching the TD-9's tom connection terminals (head and rim) into two, you can add pads and assign different sounds to each. (This is not possible with commercially available Y-cables) The two branched input terminals will each be mono connections. Compatible with TD-9, TD-11, TD-12, TD-15, TD-17, TD-30, etc. As a note on usage (specifications), please adjust the sensitivity of the rim-side pad appropriately using "Rim Gain" and "RimShot Adjust." Even if you are using a pad like the PD-8 that cannot adjust "RimShot Adjust," you can adjust "RimShot Adjust" by selecting a trigger type like PD-85. ※ The value of "RimShot Adjust" is important, so be sure to adjust it between 0 and 80 (or 0.0 and 8.0). When hitting the head-side and rim-side pads simultaneously, one of the sounds may be difficult to hear, but this seems to be a specification of the sound module, not the cable. Therefore, we recommend combinations such as tom and splash, which are not often hit simultaneously. The cable length is approximately 60cm.