We can also change the car model. Please inquire in the comments if the car model is supported. Recommended for HIJET JUMBO owners! Cutting transfer sticker This is a custom-made product. ⭐Design A, S size, Silver *The letters "HIJET JUMBO" are not included. ⚠️ If you wish to change to Design B, change the color, change the size, or change the direction to left-facing, please let us know in the comments before completing your purchase. We will make the changes. ⭐The sample image is only a composite image. Please measure the area you want to apply the sticker to. Sizes S size; approx. 70mm vertically and horizontally - Listed price M size; approx. 105mm vertically and horizontally - +300 yen L size; approx. 140mm vertically and horizontally - +600 yen 2L size; approx. 175mm vertically and horizontally - +900 yen 3L size; approx. 210mm vertically and horizontally - +1,200 yen 4L size; approx. 245mm vertically and horizontally - +1,500 yen 5L size; approx. 280mm vertically and horizontally - +1,800 yen ⚠️If you would like a scraper for easy application, please let us know in the comments before completing your purchase. We will change the price. This is a transfer sticker that leaves only the design. Please use it on your favorite areas. ○Waterproof, oil-resistant, outdoor use, high-quality, and precisely cut cutting sticker. ○Comes with a transfer sheet for easy application in minutes. ○Approximately 5 years of outdoor weather resistance, and the adhesive is designed to be easy to remove. ⭐Please also see the following. ⬇️ #koronOtherHIJET Recommended for owners ⬇️ #koronOtherStickers ⬇️ #koronAllProducts How to apply *Be sure to clean the area where you will apply the sticker. ①With the backing paper (white paper or milky white film) facing up, press the backing paper along the transfer sheet and slowly peel it off. Apply it to your desired location. At this time, the sticker may remain on the backing paper, so peel it off carefully. If it sticks to the backing paper, rub that area from the top of the backing paper and transfer it to the transfer sheet. ②Rub the letters or logo from the top of the transfer sheet with a plastic scraper to fix the adhesive. ③Slowly peel off the transparent seal on the surface of the logo horizontally to the application surface. Type: Sticker 98 78