I'm selling these because I have extras. ※The images are samples. The number of washers and other details may vary. These are unused, but they are outlet items and may have scratches, dullness, rust, chips, peeling, paint lifting, uneven finishes, etc., due to shipping and storage. Please do not purchase if you are looking for a pristine item. They are inexpensive, so please understand that they are not as perfect as Gotoh-made ones. Those who use Schaller products, etc., will understand that they bite when tightened and have some play when loosened. They don't have the perfect feel of Gotoh, but that's the specification, and they are stable after tuning. I find them useful because they are cheap and reasonably functional. Screws are included. I think they can be used for both acoustic and electric guitars. 【Handling Precautions for Pegs, Peg Buttons, etc.】 ●They will break if not handled carefully during installation. (Please be careful when tightening the mounting screws. They may break depending on how tightly they are tightened. Also, align the screw threads of the mounting screws with the threads of the shaft before tightening. Tightening when the threads are not properly engaged can damage the threads.) Peg buttons are stronger when thick and weaker when thin, so they are vulnerable to force from the vertical and horizontal directions depending on their shape, so please handle them with care. ●If the pegs are installed on a guitar with a headstock thickness of 1.7cm or more (or a guitar that is too thin), the nut may not bite deeply enough, and installation may not be possible. However, this is due to the buyer's circumstances, and returns are not accepted. (Please note that there are various cases, such as guitars with uneven headstock thickness, individual differences, and guitars with thick paint that increase the headstock thickness.) ●Also, the screw threads of the nuts, the screw threads of the buttons, and the mounting screws, as well as the screw heads, grooves, and resin buttons, are all delicate and therefore not very strong, so they are easily damaged. Please handle them carefully during installation. ●Nuts with weak bite may have shallow grooves that can come loose. In some cases, harder ones may bite more firmly, so even if they don't turn smoothly, try installing them first. (If you rub something that doesn't turn smoothly too much to make it smooth, the grooves may be worn down, making the bite shallow and causing it to come loose.)