Thank you for viewing! This is a Fender Mexico standard Stratocaster neck. I purchased it used and had it on a Strat for a while. I'm selling it because I miss the rosewood fretboard. According to the serial number, it seems to be from 2017. The frets have been replaced with Jescar 58118 stainless steel jumbo frets. Apparently, a professional did the work. The neck shape is probably a C-shape, and the radius seems to be 9.5. The moment you hold the neck, you think, "Ah, Fender!" Compared to the modern C-shape, which is common now, it feels a little thicker, but I didn't find it difficult to play even when switching. From a layman's perspective, it's almost straight with a slight forward bow, and the frets are stainless steel, so they show no wear at all. The truss rod turns both ways. The previous owner said they only turned it 45° once. I will include the nut as is. This is also a TASQ nut. I used 09-42 gauge strings with it. The heel end width is approximately 55.8mm, according to my amateur measurement. It fits snugly into a 56mm pocket. Thank you.