This listing is for the pipe stand only; the pipe itself is not included. Please note this. The stand has been coated with persimmon tannin three times. Compatible Pipe Sizes: Length: 7cm to 30cm Diameter: Up to 12mm (sizes over 12mm will be a tight fit) * May not be compatible with uniquely shaped pipes. Stable Usability: The pipe is securely supported, preventing it from rotating during vibrations or movement, providing stable use. Versatile Use: Can be used not only for pipes but also for holding tools such as brushes and design cutters. Notes: About the Material: Made of paulownia wood, which is not highly durable, so please handle with care. It is susceptible to moisture and water damage, so avoid using it in humid environments. Customization: While it has been coated with persimmon tannin, it has almost no water resistance. You can customize it with your preferred paint. Aging of Persimmon Tannin: The color will deepen over time, enhancing its natural texture. About the Shape: Paulownia wood is lightweight and easy to handle, and it provides sufficient strength for normal use. However, please understand that paulownia wood is not extremely strong, and there is a risk of damage if excessive force is applied. Product Specifications: Assembled Dimensions: Length: Approximately 10cm Width: Approximately 9cm Height: Approximately 12cm Part Thickness: 5mm Foot Thickness: Approximately 15mm Material: Paulownia wood Packaging and Shipping: Shipping Method: Yu-Packet Post Packaging Contents: Bubble wrap, plastic bag, and envelope; delivered disassembled. Please Note: The pipe is not included. Please refer to the pipe in the photo (total length approximately 21cm, bamboo part diameter approximately 9mm). As this is a handmade item, there may be some imperfections in the finish. If you are looking for perfection, please consider an official product. The item is laser-cut, and while tar has been removed, there may be some remaining tar or discoloration from burning. Some adhesive is used. Assembly Instructions: Insert both sides into the feet, then insert the support posts to complete the assembly. The feet have a direction; insert them so that the longer side faces the back. The fit is loose, so we recommend using glue to secure it.