Tamiya 1/12 NS500 '83 Champion F. Spencer Specification The front cowl has been split into upper and lower sections, allowing for its removal. The upper and lower sections are connected with six tiny screws. Other work processes and detail improvements are almost the same as the previous No. 8, Katsuyasu Kitayama specification. Exterior Parts Seam and parting line removal → Primer → Painted with Tamiya Racing White, Italian Red, and Blue → Clear coat → Decal application → Clear coat → Intermediate sanding → Clear coat → Lightly polished with compound → Finished with wax * Swing arm, chamber, etc. Reinforced with polyester putty * Added three throttle wires (Self-made tensioner) * Added wiring and piping in various places * Spiral processing of F and R brake lines * Added radiator breather hose * Steering grip wire installed * Meter glass-like processing * Added R master cylinder tube * F axle holder bolts replaced with square rivets Completed June 8, '25 All cowls can be removed, but this is at the buyer's risk. Please be careful as lifting by the tank alone may cause it to fall. Please judge the finish from the images. This is a hobby project by an amateur, so please understand that there may be paint imperfections, assembly defects, touch-up repairs, etc. If you are looking for a high level of perfection, please refrain from purchasing. We will pack with the utmost care when shipping, but the buyer is responsible for repairing or restoring any parts that may fall off or be damaged during transportation. Please understand that we cannot accept returns or complaints. Please consider the above before purchasing. Scale: 1/12