This is a custom-made, extra-thick garrison belt made from high-quality, full-grain leather (Shonan Benz Leather) and hand-dyed in all-black. While it has a brown core, the surface is thoroughly dyed, so the brown color is unlikely to show through easily. Color-fastening treatment has been applied, but color transfer may occur due to friction, so please be careful of color transfer to items that rub against it. The buckle is made of solid brass with a black dull plating, finished in matte black for a vintage look. Leather Thickness: Approximately 5.0mm Leather Width: Approximately 39mm Color: All Black (Brown Core) Tanning: Long-term pit-tanned vegetable-tanned, high-fat content Leather: Cow steer benz (the part from the buttocks to the back, which is resistant to stretching) G7 Buckle: Black dull plating (brass) Fastening Screws: Black dull plating (brass) Please provide your size and tip shape based on the following information. For the size, please refer to the image and specify the length from the buckle pin to the center of the 5th hole (3rd hole). To measure the size, lay your current belt flat and measure the length from the buckle pin to the hole or position that fits you perfectly. The pin holes (oval) are spaced 2.5cm apart with 5 holes. The maximum size that can be specified is around 100cm at the center of the 5th hole. If the size exceeds 100cm, please inquire before purchasing to check stock availability. Choose the tip shape from the images (A, B, C, D). For information on buckle types, replacements, etc., please check the following URL: https://money.daa.jp/bk/ Due to the use of steerhide (bulls over 2 years old), there may be tiger stripes (vertical wrinkles) and scratches, but these will gradually become less noticeable with use. Notes: This is an original product. Please be careful of color transfer due to friction. The images are samples, and the color and specifications may differ slightly. The size may vary by approximately ±5mm due to differences in measurement positions. The leather thickness may vary by approximately ±0.2mm depending on the skiving process and finishing conditions. This is a made-to-order product, and it usually takes about 3-7 days to ship.