Eagle Racing MINI4-MF01V4 Dedicated Tire Setter for Mass Production, Improved Carbon Parts Jig, Mini 4WD Smooth tire changes! Continuous cutting at the same dimensions is now possible. "I want to cut many tires to the same dimensions, but the cutter gets in the way and I can't remove the tire..." This improved tire setter-dedicated part was developed to solve this problem. Common Problems With standard tire setters, when trying to continuously cut multiple tires to the same dimensions, the cutter blade gets in the way, preventing tire changes, and you have to move the cross slide back and reset the position. As a result, the dimension settings shift, making efficient work impossible. Features of the Improved Parts 10mm Offset to the Right Provides space to change tires without moving the cross slide. Center Pressing Fixed Parts Redesigned Same dimensions, smoothly interchangeable without interfering with the blade. Continuous Cutting at the Same Dimensions You can efficiently process multiple tires with the same set dimensions. Improved Design for High-Precision Cutting These parts are made of carbon resin. Although the strength is slightly inferior to the original aluminum, we have conducted repeated tests and confirmed that it is possible to cut straight without any problems in actual use. *We will consider producing an aluminum version if there are many requests. Significant Improvements to the Vice Section The original vice only allows for angle adjustment at the base of the cutter, which can cause the tires to be cut at an angle. Therefore, this improved part has two set screws installed at the base of the vice. Fine adjustment of the horizontal angle of the cutter is now possible, achieving more precise cutting. No Re-adjustment Needed, Increased Efficiency Once you adjust the angle with the set screws, you can reattach the vice at the same angle without turning the set screws, unless you remove the vice. Therefore, there is no need for adjustment every time, achieving both stable precision and improved work efficiency. Merits Significant improvement in work efficiency Stable precision (no resetting required) Reduced tire production/adjustment time Easy to handle even for beginners, professional-level finish Recommended for those who: Want to streamline tire production and processing *Only the two carbon resin parts are sold. Tire setter and dust cover are not included.