★ LogicControl (MackyControl) 8-channel MIDI physical controller ★ LogicControl XT (MackyControl XT) 8-channel MIDI physical controller extension (adds 8 channels) ★ MOTU Micro Lite (5-channel MIDI interface) ★ 4 MIDI cables ★ Foot switch This is a set of 5 items. Equipped with touch-sensitive faders, allowing for precise mixing. - Model: Controller Fader - Number of channels: 16 total channels - Connection method: MIDI → USB connection - Features: Touch-sensitive faders Thank you for viewing. You can operate your DAW with a full-size moving fader that implements a total of 16 channels. You can switch between 1 channel at a time or 8 channels at a time, so you can control channels as far as you need. You can draw fader automation and pan automation without using a mouse. The faders move in read mode. Fader operations such as solo and mute can be done with your index finger, making it stress-free. The easiest thing to do is to cut and paste waveforms. You can assign cut, paste, undo, redo, etc. to unused keys and use the rotary fader to zoom to the position you want to cut, then cut, which is very convenient. I have been using MAGIX Samplitude for a long time and have been freely assigning keys by copying the LogicControl key template. There is also a template for MackieControl in Studio One. Also, the MOTU MIDI interface has 5 channels, and 2 channels are used for input and output to the LogicControl. The remaining 3 channels can be connected to a keyboard, electronic drums, etc. Since both faders and buttons are implemented, you can adjust mute, solo, and volume with both hands, allowing you to work without stress. Of course, you can also start, stop, move the timeline, zoom in and out, cut, undo, and redo without using a mouse. You can also write automation with both hands. You won't miss your inspiration. #Halloween on Mercari